KIT RENOVATION

6.50

Semi-professional polishing kit for metal surfaces.

ATTENTION!
Surfaces chemically treated through galvanic gilding,
aluminum anodizing or painting are not suitable for polishing,
as these treatments will be removed and eliminated.

SKU: 07 Category:
Guaranteed Safe Checkout

This Kit is optimal for polishing metal surfaces. Through this kit you will be able to restore a metal surface deteriorated by time or by lines and small bumps. These three specific pastes for each polishing step are exclusively indicated for round or flat metal surfaces, in stainless steel, aluminum and brass. The steps that this kit allows you to perform are:

  1. CLEANING
  2. POLISHING
  3. GLOSS

This kit is also indicated in the case in which, to obtain an even finer and more homogeneous finish, you want to perform some preliminary abrasive paper passes, in order to prepare the base for polishing.
We recommend using the P180-P220-P300-P400 abrasive papers and then move on to the abrasive paste, in the order indicated.
Together with the 3 pastes we provide a cloth that must be used at the end of each step,
As for the discs to be used, they must be purchased separately,
you can find all the disc lines in this link: Disc types
We provide two different disc sizes:

    1. 150mm
    2. 100mm

Each stick of paste has a weight of 180g as specified on the cap applied to the bottom of the package.
Each package specifies the gloss levels of the paste and the dryness or hardness levels of the paste,
the various information for how the paste is to be applied to the disc is also written.

Weight540 g
Dimensions220 × 160 × 50 mm
Information

Apply the abrasive paste on the fabric support indicated, each paste is indicated with a specific disc in cotton, natural cotton or flannel cotton. Before starting polishing make sure you have properly tightened the cloth disc on the spindle of the drill or bench polisher. Always wear protective gloves and goggles. We recommend using the same disc with the same paste in order not to contaminate it. Knead the disc moderately, in order to always keep it moist but without exceeding to avoid leaving too many residues on the surface itself. Moderate the speed of the drill or cutting polisher.

Shipment

Usually shipped within 2/3 days.

Reviews

There are no reviews yet.

Be the first to review “KIT RENOVATION”

Your email address will not be published. Required fields are marked *

Shopping Cart
Packaging_kit_3_atl_abrasivi_kit_polishing_3_solide_abrasive_paste_montichiari_bresciaKIT RENOVATION
6.50